Phonak 3 Pin Receivers For Marvel & Paradise Aids

(1 customer review)


The Phonak 3 Pin S M or P Receivers are compatible with Phonak Marvel & Paradise Aids.

For all other Phonak aids you would require the Phonak 2 Pin xReceivers.

For help in knowing which receiver to choose your existing receiver may have all the answers. Each receiver is coloured coded and features printed numbers on the side.

Select your size, power, and ear below.

Includes : x1 Receiver wire, 1 Open Dome of each size S/M/L & 1 replacement Pin.


Add to Wishlist
Add to Wishlist


Receiver wires do become worn after time. Due to the amount of time you can wear your hearing aid changing your receiver wire can provide you with a consistent audio performance.

Receivers on average can last up to 6-12 months, this does depend on your amount of use. Especially if you remove and insert your hearing aids daily.

If your audio quality begins to reduce we recommend maintaining your hearing aids by changing your wax filters and replacing you receiver wire.


These 3 Pin Receivers are only compatible with the Phonak Marvel & Paradise Hearing Aids.

If you have any other Phonak hearing aids you would require the Phonak 2 Pin xReceivers For RIC Hearing Aids. Find these on our website.

How to identify your receiver side, size & power:

Each receiver is colour coded to help you identify which ear is required.

Ear side:

Blue = Left

Red = Right

On the side of the receiver wire you should either see a print, or embossed set of numbers. These will indicate your strength and wire length.


0, 1, 2 or 3


Standard = S

Medium = M

Power = P









Retention Locks for your receivers: (Sold Separately)

These are thin flexible plastic attachments which slide onto the receiver to help achieve a snug fit inside your ear area. If you’re very active these help to reduce you hearing aid from moving during use.

Choose the same power of retention lock as receiver wire, for example, Standard (S) lock for Standard receiver.

To insert a hearing aid with a retention lock:

  1. Insert the hearing aid as usual
  2. Tuck the retention lock into the bottom of the concha (the part of your ear just outside the ear canal)

Find these on our website.

Domes for Phonak 3 Pin Receivers: (Sold Separately)

These are the small grey rubber tips which are placed on the end of your receiver and sit inside your ear canal. There are many different types of domes to suit your hearing loss.

Here is an illustration of the domes available for the Phonak Hearing Aids.

Find these on our website.





The video below shows how to change the receiver wire on your hearing aid –


Additional information


Left, Right


Standard (S), Medium (M), Power (P)


0, 1, 2, 3

1 review for Phonak 3 Pin Receivers For Marvel & Paradise Aids

  1. Alan Goodall (verified owner)

Add a review

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.