Phonak 2 Pin xReceivers For RIC Hearing Aids
£26.99
The Phonak 2 Pin xReceivers are compatible with all Phonak hearing aids apart from Marvel & Paradise. The compatible hearing aids includes Belong, Venture, Quest & more! Each is available in various sizes and power levels.
For Phonak Marvel & Paradise aid please CLICK HERE to be taken to the Phonak 3 Pin Receivers.
For help in knowing which receiver to choose your existing receiver may have all the answers. Each receiver is coloured coded and features printed numbers on the side.
Select your size, power, and ear below.
Includes: x1 xReceiver wire, 1 Open Smokey Dome of each size S/M/L & 1 replacement Pin.
Description
Receiver wires do become worn after time. Due to the amount of time you can wear your hearing aid changing your receiver wire can provide you with a consistent audio performance.
Receivers on average can last up to 6-12 months, this does depend on your amount of use. Especially if you remove and insert your hearing aids daily.
If your audio quality begins to reduce we recommend maintaining your hearing aids by changing your wax filters and replacing you receiver wire.
Compatibility:
These 2 Pin xReceivers are only compatible with the Phonak Hearing Aids.
Compatible with all Phonak hearing aids apart from Marvel & Paradise. The compatible hearing aids includes Belong, Venture, Quest & more!
For Phonak Marvel & Paradise aid please CLICK HERE to be taken to the Phonak 3 Pin Receivers.
How to identify your receiver side, size & power:
Each receiver is colour coded to help you identify which ear is required.
Ear side:
Blue = Left
Red = Right
On the side of the receiver wire you should either see a print, or embossed set of numbers. These will indicate your strength and wire length.
Length/Size:
0, 1, 2 or 3
Power:
Standard = S
Power = P
EXAMPLE RECEIVER = LEFT, 1, STANDARD
How to change your receivers
Retention Locks for your receivers: (Sold Separately)
These are thin flexible plastic attachments which slide onto the receiver to help achieve a snug fit inside your ear area. If you’re very active these help to reduce you hearing aid from moving during use.
Choose the same power of retention lock as receiver wire, for example, Standard (S) lock for Standard receiver.
To insert a hearing aid with a retention lock:
- Insert the hearing aid as usual
- Tuck the retention lock into the bottom of the concha (the part of your ear just outside the ear canal)
CLICK HERE to navigate to the 2Pin Receiver Retention locks.
Domes for Phonak 2 Pin xReceivers: (Sold Separately)
These are the small grey rubber tips which are placed on the end of your receiver and sit inside your ear canal. There are many different types of domes to suit your hearing loss.
Here is an illustration of the domes available for the Phonak Hearing Aids.
CLICK HERE to navigate to the Smokey/Unitron Domes.
Additional information
Weight | 21 g |
---|---|
Dimensions | 20 × 2.5 × 15 cm |
Ear | Left, Right |
Power | Standard, Power |
Size | 0, 1, 2, 3 |
Adnan Chaherli (verified owner) –
Very good service. Thsnks
Richard T. (verified owner) –
Quick service with good product
Stephen Long (verified owner) –
The service was as good as you expect from a postal service, however this morning the hearing aid is dead ( fully charged ,wax guard changed ) can only assume a problem with it the receiver that is.
Julie C. (verified owner) –
Raymond Berry (verified owner) –
Prompt service
Mark Wilkinson (verified owner) –
Excellent piece of kit
Joseph (verified owner) –
Excellent very fast service. Recommend
Albert (verified owner) –
Very happy with my purchase, & it was delivered the very next day.
Arthur Hurn (verified owner) –
Excellent service
Julie C. (verified owner) –
Great value for money and works great , easy to replace also . Arrived very fast !
Rodney Tanswell (verified owner) –
roger jameson (verified owner) –