Phonak Receiver Removal Tool

£1.99

Tool to help remove and insert the pins of your hearing aid housings and to operate the receiver locking mechanism.

Includes: x1 Receiver Removal Tool

2 in stock

Description

This small tool is a required for selected Phonak hearing aids. It releases the pin within the hearing aid housing to allow you to release the locking of your receiver wire. You can also use this tool once your new receiver has been inserted to lock your mechanism back into place.

We recommend not completely removing the pin from the aid, the idea is to just move to allow the mechanism to be released.

Here are some helpful steps:

  1. Take your receiver removal tool and push the pin mechanism with the pointed end to release this to the other side.
  2. Stop pushing when the pin is showing 2-3mm’s. We recommend not completely removing the pin.
  3. Firmly pull the receiver wire out from the hearing aid to release.
  4. Replace your new receiver wire into the aid and push down firmly into place.
  5. Use the flat end of your receiver tool to push the pin back into the aid. This will lock the mechanism and you receive will be locked into place.

 

Includes: x1 Receiver Removal Tool

Additional information

Weight 23 g