Description

The Visit Door Transmitter helps you to notice when the doorbell rings, no matter if you are several rooms away. It signals the Visit receiver that notifies you with your own choice of flashes, sounds and vibrations. Recognises up to three existing doorbells because it uses a unique ‘sound training’ feature, up to 250m range.

Designed to connect with the bellman Visit System, the Visit Door Transmitter helps the user notice when their doorbell rings, even if the user is several rooms away. The door transmitter signals to the Visit receiver, this notifies the user with their own choice of flashes, colours, sounds and vibrations and enables the user to be aware of arriving guests. This product can detect both the doorbell and intercom.

Installation

Appropriate for : Single sound source using the transmitter’s internal microphone.

Pull the battery tab to start the transmitter. Clean the wall with the wet wipe and remove the protective film from the Velcro. Mount the door transmitter to the left of the doorbell’s sound source, as close as possible. It is recommended you use the screw and plug provided with the product if you are struggling to do this.

Alternative Installation

Appropriate for : Single sound source using the external microphone accessory.

Connect the external microphone (sold separately) to the transmitter. Remove the protective film and attach it to the intercom’s speaker. Pull the battery tab to start the transmitter. Remove the protective film from the Velcro and mount the transmitter on the wall. Within 2 minutes, press the lower button 10 times to turn off the internal microphone. The LEDs will blink 3 times in red to confirm. Note: If you exceed 2 minutes, you need to restart the transmitter by removing the batteries and putting them back in again.