Oticon Receiver Removal Tool

(1 customer review)


Tool to help remove and insert the pins of your hearing aid housings and to operate the receiver locking mechanism.

Includes: x1 Receiver Removal Tool

10 in stock

Oticon Logo


This small tool is a required for selected Oticon hearing aids. It releases the pin within the hearing aid housing to allow you to release the locking of your receiver wire. You can also use this tool once your new receiver has been inserted to lock your mechanism back into place.

We recommend not completely removing the pin from the aid, the idea is to just move to allow the mechanism to be released.

Here are some helpful steps:

  1. Take your receiver removal tool and push the pin mechanism with the pointed end to release this to the other side.
  2. Stop pushing when the pin is showing 2-3mm’s. We recommend not completely removing the pin.
  3. Firmly pull the receiver wire out from the hearing aid to release.
  4. Replace your new receiver wire into the aid and push down firmly into place.
  5. Use the flat end of your receiver tool to push the pin back into the aid. This will lock the mechanism and you receive will be locked into place.


Includes: x1 Receiver Removal Tool

Additional information

Weight23 g

1 review for Oticon Receiver Removal Tool

  1. Vicki M. (verified owner)

    I am so pleased with the hearing device tool. It worked perfectly to open the battery compartments of my hearing devices. I’m so happy you had it. The shipping was fast and the tool was nicely packaged. Thanks for the great service!

Add a review